# Question - Worker is not ok after community installation

**URL:** https://discussions.eramba.org/t/question-worker-is-not-ok-after-community-installation/2953
**Category:** Forum - Installation
**Created:** [April 7, 2023, 11:18pm UTC](https://discussions.eramba.org/t/question-worker-is-not-ok-after-community-installation/2953 "2023-04-07T23:18:15Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![abdessamad](https://discussions.eramba.org/letter_avatar_proxy/v4/letter/a/bb73d2/32.png) [@abdessamad](https://discussions.eramba.org/u/abdessamad)
#### Post date: [April 7, 2023, 11:18pm UTC](https://discussions.eramba.org/t/question-worker-is-not-ok-after-community-installation/2953/1 "2023-04-07T23:18:15Z")

</div>

After the installation of eramba community version 3.19.1 i am facing this problem:

Worker Under System / Settings / Crontab Settings you can review the required crontab configurations. - NOT OK

![image](https://discussions.eramba.org/uploads/default/original/2X/b/b8c1d59bb6f7fb4866d8a9ed294dc37260530c65.png)

---

<div class="post-metadata">

### Author: ![david.schroth](https://discussions.eramba.org/letter_avatar_proxy/v4/letter/d/43a26b/32.png) [@david.schroth](https://discussions.eramba.org/u/david.schroth)
#### Post date: [April 8, 2023, 12:26am UTC](https://discussions.eramba.org/t/question-worker-is-not-ok-after-community-installation/2953/2 "2023-04-08T00:26:44Z")

</div>

Fairly normal after an upgrade. Should resolve itself next time the cron runs - usually every 10 minutes.

---

<div class="post-metadata">

### Author: ![keypair](https://discussions.eramba.org/letter_avatar_proxy/v4/letter/k/7ab992/32.png) [@keypair](https://discussions.eramba.org/u/keypair)
#### Post date: [January 24, 2024, 10:50am UTC](https://discussions.eramba.org/t/question-worker-is-not-ok-after-community-installation/2953/3 "2024-01-24T10:50:20Z")

</div>

Hi guys,

I’m very glad I found this post.

It’s been 3 days and the message is still the same. What else should I be checking?

–  
Paul

---

<div class="post-metadata">

### Author: ![sam](https://discussions.eramba.org/letter_avatar_proxy/v4/letter/s/5f9b8f/32.png) [@sam](https://discussions.eramba.org/u/sam)
#### Post date: [January 24, 2024, 1:12pm UTC](https://discussions.eramba.org/t/question-worker-is-not-ok-after-community-installation/2953/4 "2024-01-24T13:12:26Z")

</div>

Hello,

First, try to check cron container logs and if there are none have a look at /var/log/cron.log  
You can also try to execute it manually to see if it is not erroring.